NDS IM12-150 iManager 12v 150A with touchscreen
Do you want more energy capacity in your mobile home, motor home or yacht? The NDS iManager offers the solution. This innovative control system, based on smart technology, ensures the maximum result from your batteries in a safe way.
For who?
The iManager can be used by everybody with 2 service batteries or who want 2 service batteries. The iManager ensures that batteries no longer need to be connected in parallel. This has some important advantages:
- Batteries last longer;
- Batteries are no longer defective at the same time (you replace only 1 battery in case of a defect);
- Brand, type (gel / AGM), amperage and age of batteries do not have to be the same;
- Alerts about battery management and maintenance.
- Wireless touchscreen (optional)
The iManager makes it possible to manage up to three batteries simultaneously or separately. Even if these differ in amperage and brand. The coupled automatic battery shut-off function ensures optimum efficiency and maximum battery life.
The control of the battery management is done via a wireless touchscreen. This continuously shows the charge level of the connected batteries and makes it easy to activate or deactivate remote batteries.
Charging and discharging
The iManager controls the voltage of max 3 batteries at the same time. It takes into account charging and discharging currents and chooses the battery to be used. NDS iManager also ensures that the charge level remains the same. This way the batteries can supply power continuously.
Battery control via touchscreen
With the touchscreen of the iManager IM12-150 you can control max 3 batteries at the same time (or seperate). The automatic shutdown function for batteries make sure that your batteries have maximum performance and a maximum duration. On the display you can check the charge level and you can switch off or on batteries directly.
Automatic switch off
iManager is secured with an automatic battery shutdown. This will be activated as:
- the voltage of 1 or more batteries is less than 10.5 V
- the voltage of 1 or more batteries remains lower than 11 V for more than 15 minutes
- the temperature of 1 or more batteries is higher than 70 ° C
Special starter battery output
The iManager has a special starter battery output. As soon as a loader or solar panel is recognized at the service batteries which or 100% loaded, then 4 A of power is supplied to the starter batery. In this way you also have power after a long break.
Advantages and specifications:
- Automatic or manual control of one or two service batteries, even with different brands and ampere levels
- Special motor battery edition
- Temperature control during loading and discharge
- Continuous view of the battery status: level of charging, amperage, charge- and discharge voltage
- Automatic or manual battery switch off
- Automatic alerts about battery management and maintenance
- Date and time display
- Blackbox/display connection possible via cable (iM 12-150) or wireless (iM 12-150W)
Technical specifications Blackbox IManager:
IM12-150 | IM12-150W | |
Consumption with max clearness | 60mA | 86mA |
Consumption when display off | 8mA | 34mA |
Consumption when not active | 2mA | 5,2mA |
Type of connection | 7 meter cable | wireless |
Type of display | TFT 2.83″- 262K Touch | TFT 2.83″- 262K Touch |
Operating Temperature | “-10°C – +70°C | “-10°C – +70°C |
Technical specifications Touchscreen:
IM12-150 | IM12-150W | |
Consumption max clearness | 60mA | 86mA |
Consumption with display off | 8mA | 34mA |
Consumption when not active | 2mA | 5,2mA |
Type of connection | 7 meter cable | wireless |
Type of display | TFT 2.83″- 262K Touch | TFT 2.83″- 262K Touch |
Operating Temperature | “-10°C – +70°C | “-10°C – +70°C |