Inverto Single Monoblock 23mm LNB 4.3° for 80 cm dish antenna
This monoblock LNB is compliant for 80cm dish antennas. The Inverto LNB is also HDTV compliant and supports important features like: a low energy consumption, DiSEqC switching and a High Frequency Stability.
Can be used for simultaneous reception of the Astra 1 and 3 satellite positions and the connection of 1 TV with DVB-S2 satellite tuner or 1 satellite receiver with Single DVB-S2 satellite tuner.
Technical Parameters Inverto Single Monoblock 23mm LNB 4.3° for 80cm dish antenna
- HDTV compliant: Yes
- Low Band Input Frequency Range: 10.7 ~ 11.7 GHz
- Low Band Input Frequency Range: 950 ~ 1,950 MHz
- Low Band LO Frequency: 9.75 GHz
- High Band Input Frequency Range: 11.7 ~ 12.75 GHz
- High Band Input Frequency Range: 1,100 ~ 2,150 MHz
- High Band LO Frequency: 10.6 GHz
- Noise: 0.2 dB Typ. (0.7 dB Max.)
- LO Initial Accuracy: +/- 1.0 MHz Max.
- LO Temperature Drift: +/- 3.0 MHz Max.
- Phase Noise (@ 10 kHz): - 90 dBc / Hz Max.
- Conversion Gain: 55 dB Min.
- Gain Ripple (Over 26MHz Bandwidth): +/- 0.75 dB
- Gain Variation (Over Full Band) : +/- 4 dB Max.
- 1 dB Compression Point (@ Output): 0.0 dBm Min.
- Image Rejection: 40 dB Min.
- Cross Polarisation Isolation: 22 dB Min.
- Output VSWR: 2.5 : 1
- In-Band Spurious: - 60 dBm
- Max. power consumption: 120 mA Max. @ 11 ~ 20 V
- Temperature Range: - 30 °C ~ + 60 °C
- Output Impedance: 75 Ω
- Output Connector: F-Type ("female")
- Weight: 210 g
LNB | |
Number of satellites | 2 |
Satellite reception | Astra 1 & 3 |
LNB Type | Single |
Suitable for | 80 cm antenna |