Inverto Pro UniCable Twin LNB

Limited availablity!

With the Universal Pro Unicable Twin 40mm LNB it's possible -by connecting 2 coax cables from the antenna to the receiver-, to watch seperate when 4 (Unicable) satellite receivers with Single DVB-S2 tuner are connected (or up to max 4 tuners (i.e. 2x a Dual DVB-S2 tuner) with one cable). This LNB can be used for instance in combination with Homecast satellite receivers.

With a normal twin-tuner PVR without Unicable support normally 2 coax cables need to be connected from the antenna to the set-top box. With Unicable only one coax cable is required. Furtnermore an Unicable based system can be more easy extended up to max 3 extra satellite receivers. Developed with the help of ST Microelectronics technology, Unicable is the ideal system to distribute the satellite signal from the dish antenna to the set-top box(es).

Technical parameters Inverto Pro UniCable Twin LNB

• Low Band Input Frequency Range: 10.7 ~ 11.7 GHz
• LO Frequency: 9.75 GHz
• High Band Input Frequency Range: 11.7 ~ 12.75 GHz
• LO frequency 10.6 Hz C +
• LO Initial Accuracy: ±1.0 MHz
• LO Temperature Drift: ±2.5 MHz
• LO Noise Phase: @ 10K Hz -90 dBc / Hz max.
• SCR Conversion Gain: 57 dB min.
• Legacy Conversion Gain: 55 dB min
• Gain variation: ± 0,75 dB / 27 MHz
• Image Rejection: 40 dB min.
• 1 dB compression point (O / P) 0.0 dBm min.
• Cross-poll isolation of 20 dB min
• O / P VSWR 2.5: 1
• Output impedance: 75Ω (F-type)
• IF channel bandwidth: 60 MHz
• Output IF channel 1 (SCR0): 1,210 MHz
• Output IF channel 2 (SCR1): 1,420 MHz
• Output IF channel 3 (SCR2): 1,680 MHz
• Output IF channel 4 (SCR3): 2,040 MHz
• Channel Isolation: 20 dB min
• Legacy-ports: 1
  
• SCR's control signal DiSEqC commando extension based on EN 50494
• Legacy Switch Voltage Control: <14,2 (V),> 15 (H) Volt
• Legacy 22k sensitivity: 220 mV [min.]
• Power Consumption: 250mA@13.5V
• Environment Temperature: -30°C ~ +60°C
• Weight: 350g
• 5 year warranty