Inverto Multiconnect IDLB-QUTL20-MULTI-OPP Quattro 23mm LNB
This innovative LNB is designed for satellite tv installations where multiple LNB's need to combined at one satellite dish antenna. The used technology is based on advanced dielectric materials and a perfect front-end design. This technology ensures maximum energy transfer from the antenna to the LNB, even when the LNB position is not pointed to the central point of the antenna. And because of the 'long neck' of the LNB it's possible to put multiple LNB's close ot each other. This allows the reception of satellite positions that are close to each other with their orbit position; something that's often not possible with 'normal' LNB's in combination with only the use of one satellite dish antenna.
PLEASE NOTICE: The Inverto Multiconnect Quattro LNB can only be used in combination with a multiswitch! For use in Multiple Satellite TV installation systems.
Technical paramaters Inverto Multiconnect IDLB-QUTL20-MULTI-OPP Quattro 23mm LNB
Low Band Input Frequency Range: | 10.7 ~ 11.7 GHz |
Low Band Output Frequency Range: | 950 ~ 1,950 MHz |
High Band Input Frequency Range: | 11.7 ~ 12.75 GHz |
High Band Output Frequency Range: | 1,100 ~ 2,150 MHz |
High Band LO Frequency: | 10.6 GHz |
Noise Figure: | 0,2 dB typ. (0.7 dB Max.) |
LO Initial Accuracy: | ±1.0 MHz Max. |
LO Temperature Drift: | ±3.0 MHz Max. |
Noise Phase (@ 10 kHz): | - 90 dBc / Hz Max. |
Conversion Gain: | 60 dB Min. |
Gain Ripple (Over 26 MHz Bandwidth): | ±0.75 dB |
Gain Variation (Over Full Band): | ±4 dB Max. |
Image Rejection: | 40 dB Min. |
1 dB compression point (@ Output): | 0.0 dBm Min. |
Cross Polarization Isolation: | 22 dB Min. |
Output VSWR: | 2.0: 1 |
In-Band Spurious: | - 60 dBm Max. |
Power Consumption: | 200 mA Max. @ 11 ~ 20 V |
Environment Temperature: | - 30 ° C ~ + 60 ° C |
Output Impedance: | 75 Ω |
Output Connector: | F-Type (Female) |
Weight: | 344 g |
LNB | |
Number of satellites | 1 |
LNB Type | Quattro |