Inverto Home Pro PLL Octo 40mm lnb

The Inverto IDLH-OCT410-HMPRO-OPN Octo PLL LNB is suitable for the reception of the signal of one satellite position and the distribution of this signal to 8 DVB-S2 satellite tuners:

• in 8 TV's or
• 8 satellite receivers with each one DVB-S2 satellite tuner or
• to 4 satellite receivers with each a Twin / Dual DVB-S2 satellite tuner or
• to a combination of the above mentioned options.

The special design of the LNB make sure that interference of 4G/LTE-signals have no influence on the signal quality. This LNB provides optimized reception capabilities using the latest chipset technology and waveguide design for satellite signal reception.

Unlike conventional LNB's the IDLH-OCT410-HMPRO-OPN is a Octo PLL (= phase-locked loop) LNB.

The IDLH-OCT410-HMPRO-OPN LNB is HD and UHD compliant and delivers excellent RF performances.

Main features Inverto IDLH-OCT410-HMPRO-OPN Home Pro 40mm Octo PLL LNB

• Low Phase Noise, DVB-S2 (HD and UHD) compliant
• Very low Noise Figure
• Low power consumption
• High Cross Polarization Isolation
• High Frequency stability

Technical parameters Inverto IDLH-OCT410-HMPRO-OPN Home Pro 40mm Octo PLL LNB

• Input Frequency Range: 10.7 GHz ~ 12.75 GHz
• Output Frequency Range: 950 MHz ~ 1,950 MHz
• Low band LO frequency: 9.75 GHz
• High band LO frequency: 10.6 GHz
• Noise figure: 0.3 dB typ. (0.7 dB max.)
• LO frequency accuracy @ 25 °C: ±500 kHz max.
• LO temperature drift: ±1,0 MHz max.
• LO phase noise @ 10 kHz: -85 dBc/Hz max.
• Conversion gain: 55 dB min.
• Gain ripple (over 26 MHz bandwidth): ±0.75 dB
• Gain variation (over full band): ±4 dB
• Image rejection: 40 dB min.
• 3th order intermodulation - ICP3: 10 dBm min.
• 1 dB compression point (@ output): 0 dBm min.
• Cross polarization isolation: 22 dB min.
• Control signal Ca (V): 11,0 V ~ 14,0 V
• Control signal Cb (H): 16,0 V ~ 20,0 V
• Control signal Cc (band switching): 22 kHz (±4), 0.4 V ~ 0.8 V pp
• Output VSWR: 2.5:1
• In band spurious level: -60 dBm max.
• Current consumption: 200 mA max. @ 11 VDC ~ 20 VDC
• Operating temperature: -30 °C ~ +60 °C
• Output impedance: 75 Ω
• Output connector type: F-type (female)
• Dish F/D ratio: 0.6
• Weight: 276 g
• Packaging dimensions (W x D x H): 6.8 x 31.5 x 19.7 cm
• Packaging weight: 0.79 kg