GT-Sat QDMO3 Quad Monoblock 3 degrees LNB
This GT-Sat Quad Monoblock can be used for the reception of 2 different satellite position. Depending on the size of the dish antenna, 65 or 80 cm, different satellite positions can be received.
In combination with an 65 cm dish antenna this LNB can be used for the reception of the Astra 1 and Astra 3 satellite positions.
In combination with an 80 cm dish antenna this LNB can be used for the reception of satellite positions that differ 3º degrees from each other, like for instance the Astra 1 (19.2º East) and Eutelsat 16º East).
This LNB is UHD DVBS2 Compliant and has 4 outputs, i.e. can be used for connnecting up to 4 satellite receivers or 4 TV's with built-in DVB-S2 satellite tuner.
This LNB is supplied with an adapter ring for a 40 mm LNB holder.
Technical data GT-Sat QDMO3 Quad Monoblock 3 degrees LNB
Input Frequency Range: | Low Band : 10.7 ~ 11.7 GHz |
High Band : 11.7 ~ 12.75 GHz | |
Output Frequency Range: | Low Band : 950 ~ 1,950 MHz |
High Band : 1,100 ~ 2,150 MHz | |
L.O. Frequency: | Low Band : 9.75 GHz |
High Band : 10.60 GHz | |
L.O. Frequency Stability: | +/-1 MHz (Max)@ room temperature |
Local Oscillator Frequency Noise Phase: | -60 dBc/Hz @ 1KHz (Max.) |
-85 dBc/Hz @ 10KHz (Max.) | |
-105 dBc/Hz @ 100KHz (Max.) | |
Noise Figure: | 0.2 dB (Typ.) |
Conversie Gain: | 58 ~ 62 dB |
Gain Flatness 26 MHz Band Width: | +/-0.5dB (Typ.) |
Polarity Switching Voltage: | VERTICAL: 11.0 ~ 14.0 Vdc |
HORIZONTAL: 16.0 ~ 20.0 Vdc | |
Band Switching: | Low Band: 0 kHz |
High Band: 22 kHz (+/- 4 kHz) DiSEqC 1.0 |
|
Cross-Pol. Isolation: | 25 dB (Typ.) |
Image Rejection: | 400 dB (Min.) |
Power Consumption: | 210 mA (Typ.) |
Output Connector Type: | 75 OHMS F-Female |
Output Spurious: | <-60dBm |
Environment Temperature Range: | -40°C ~ +65°C |
Feed Length: | 42 mm |
LNB | |
Number of satellites | 2 |
Satellite reception | Astra 1 & 3 |
LNB Type | Quad |
Suitable for | 80 cm antenna |